Shrink Braided Material: Fourub heat shrink braided sleeving is woven from high-density polyethylene and polyester fiber materials. Allows the tubing to shrink at a shrinkage ratio of 2:1. Helps seal the end of wire wraps and accommodates different shapes of cables.
Resistance to Wear: Fourub heat shrink wire loom has excellent fabric abrasion resistance. Can withstand 150000 times of wear resistance. It can prevent serious wear and tear due to repeated friction of other objects during use.
Protecting Automotive Amplifier Wires: 2 to 1 shrinkable sleeving can provide protection and organize wiring harnesses for some of the amp's power wires under the engine bay. Ideal for repairing the end of broken car amp cables.
Work Temp: The minimum is -40°C(-40°F). The maximum is 125°C(257°F). Heat shrink fabric sleeving above 251°C (483.8°F) will burn out (this heating temperature not recommended). It is recommended to heat it evenly. When heated, it will harden, but it will not affect the use.
Different Sizes: What you chose is an inner diameter of 3/8 inch in a rounded state before shrinking. The length is 300 inch. The flat width diameter refers to the inner diameter in the laying flat state. This one has a flat width of 3/4 inch.
4:1 Adhesive Lined Heat Shrink Tubing Roll Protection Wiring Sheath Harnesses Waterproof Glue Insulated Dual Wall (1"-22ft)
KWD 13.500
2:1 Ratio Flat Heat Shrinkable Braided Sleeving,Electrical Insulating Tubing,Durable Automotive Fabric Harness Shrinking Sheath (1-3/8"-20ft)
KWD 15
2 in 1 Ratio Heat Shrink Braided Sleeving, Flat Wire Insulation Protection, Automotive Braided Protective Sleeve, Abrasion Resistance (3/4"-18Ft)
KWD 12.500
innomaker DTOF LiDAR Time-of-Flight Lidar STL-06P, 360 Degree Omni-Directional Laser Scanning, Anti-glare 60000Lux, 5000Hz ranging Frequency, 12m radius ranging, Support ROS/ROS2
KWD 34
