Why choose us:
1. Very closed color to MacBook's;
2. Full body protection;
3. Precisely cut, the fractional error within 0.5%;
4. 4H hardness, little scratch or strike wouldn't do damage to them.

What you get:
1. Upper Skin * 1
2. Bottom Skin * 1
3. TouchPad Skin * 1
4. Palm Rest Skin * 1
5. Wiping Cloth
6. Wiping Cloth+ Alcohol Bag

Warm Tips:
1. For upper and bottom skin, when aligning the holes/edges/corners of the film, if the alignment is not good, please do not press the film onto the machine surface.
You can easily remove the skin and reposition it.
2. Once upper and bottom skin be finished completely, we suggest do not remove. Otherwise, the skins would be damaged.
3. Plam rest skin is hard material, if stick status not good, you can take it away slowly and stick it again.
4. About curve fitting design, a reasonable 1 mm gap to edge ensures stickers won`t curl during usage. Please take care of its placeholder.
5. If carry it out,suggest using a sleeve instead of placing it directly into the computer backpack, otherwise the outer skin is easily scratched by sharp objects such as keys, or the plush inside the computer bag will slowly enter the skins from the edge, causing premature damage to the stickers.
6. The operation process may take half an hour, please reserve enough time.

Pasting Instruction:
1. Please wash the hands and table firstly, and then pick up the different skins and place them onto the surface of the machine to check if the size is correct.
2. Please use wiping cloth we provided to clean the MacBook Body and Screen before pasting stickers.
3. Please take out the upper skin and then peel off and cut half of the back release paper (you can continue to cut the back paper to small piece and stick one onto the original side for finger gripping operation easily).
4. Align upper sticker's LOGO hole first, if hole fit perfect then fit edges and four corners to the laptop body.
5. If hole/edges/corners fit good, you can stick it easily and if align not good, please do not press it, you can slowly take it away and then re-alignment and paste again.
6. After all align and fit perfectly, then peel off the balance back paper slowly and paste the other half skin at the same time.
7. After that, use the wiping cloth to wipe the laptop and squeeze out bubbles easily till the bubbles be disappeared.
8. Then you can use the same way to paste another stickers in the same method.
9. If stickers do not paste well, please contact us at the first time. We can help you to solve it soon.

For screen pretector instruction:
1. Open the packaging and check if the items are complete.
2. Please take the one piece screen protector and place it onto the surface of screen, and then carefully align the holes and four sides to check if the product is correct.
3. Please take out the alcohol bag and carefully clean the dirt on the screen, please do not leave any stains or dust.
4. Please attach auxiliary labels to the left and right sides of release film No. 2, aligning the blue area of the label with the edge of the release film (auxiliary labels cannot be attached to the screen) 5. After confirming that there are no stains or dust on the computer screen, and then peel off the No.1 release film.
6. Align the edges of the left and right sides of the screen (slowly) and apply it, and the screen film will automatically adhere to the surface of the screen.
7. Then peel off the No. 2 release film.
8. If bubbles are generated, please check if there are any dust or impurities adsorbed inside the bubbles. If there is, please open the film aid kit, take out the adhesive tape and stick it to a corner of the screen film, and lift it up to the position with bubbles.
9. Use a dust removal sticker to absorb the dust inside the screen protector, then slowly lower the screen protector until it is completely adsorbed onto the screen.
10. Small bubbles (without dust inside) can be slowly pushed out with provided wiping cloth until the surface bubbles are expelled.
11. You can continue to evenly wipe the surface of the screen film with wiping cloth to make the screen protector and MacBook screen adhere more tightly.
12. We have provided a spare screen film. If it is damaged, please carefully read the operating instructions and try again.