Specifications:
Material: plastic wheel rim, rubber tyre,with foam insert; NOT pre glued, need to glue before use.
Suitable for RC 1: 10 mild rock crawler, rc truck, trophy truck or buggy. please must check size before buying. Tire outer diameter (height) is a bit smaller than most 1/10 crawler tires.
It may can work on 1:12 1:14 crawler truck with 12mm hub drive hex.
Can be Took Apart and Reassemble If Receive the Tires and Rims are Pre-mounted in the Wrong Direction.
How to Strengthen Wheel Rims:
(1) First, make sure the wheel center hole size matches the original OEM rims. Sometimes you may need to drill out the center hole slightly so the rims fully fit over the axle shaft.
(2) It is best to use nylon insert lock nuts with flanges.
(3) To add a washer. Adding a washer to the outside of the rim will evenly distribute the force over a wider area. For extra strength, can glue the washer to the rim.(This is not necessary, up to you)
Package Contents:
4 x Wheel Rims and Tires