Semaiki Strike Pack for PS4 Controller,Back Button Attachment Dominator Mod Kit Compatible with PS4 Controller, Paddles with Turbo & Memory Function, Plug and Play

Setting the programming function - Press the SET button for 2 seconds, the corresponding LED of × flashes quickly (4HZ), then briefly press the M1 or M2 button, the LED flashes slowly on the screen of the corresponding function (the flashing sequence is X, ○, △, □, R3, L3, R2, L2, R1, L1)
Setting the programming function - then press the SET button, the corresponding function will be shown on M1/2; Example: when you enter programming mode, press the M1 button to display the LED to R1, then press the SET button again, the LED on R1 will be long bright, the function of M1 is R1; if you program M2, it is similar to Top described above
Cancel function - Press and hold the SET button for 5 seconds, the programming LED flashes quickly and goes off and the M1/2 function is cleared
Memory function of the programming button - Insert the rear extension button into the handle, if M1 / 2 has no function, the LED1 flashes slowly (2HZ) for 3 seconds and then goes off, long press the SET button to enter programming mode, then the LED1 flashes quickly. When M1/2 has saved the last programming function, the corresponding LED lights up for a long time
Setting the turbo function - Press and hold the function button and turbo button at the same time, the function button has the turbo burst function, press the above combined button again to cancel the turbo function. When the turbo function is activated, after pressing the button, the LED for the function flashes quickly (4HZ)

Hello,