1.5 OZ Injector for plastisol !!! This model does not have a spout that falls out or can be removed !!! Plastisol residues are removed through the cap at the top of the syringe, it is unscrewed. Plastic injector has a standard 5/8" (16 mm) nozzle diameter, which is compatible with most engineered stone or aluminum bait moIds. Piston have a rubber sealing o-ring to prevent plastisol (soft plastic) from leaking. When using this injector please be sure to wear gloves since injector gets hot from the plastisol inside The primary usage of this injector is to cast fishing injection bait moIds with hot plastisol (soft plastic) to create DIY baits. Attention: Pull the handle up very strongly before use, as the grease hardens in the cold The tongs in the photo are not included in this kit and are shown as an example (you can use a pencil or stick) REMEMBER the injector gets hot when plastisol is inside, use protective clothing like gloves, long sleeves, pants, and closed toe shoes (no sandals) when pouring hot Luresol. Wear appropriate safety goggles and provide adequate ventilation in your work space too (either a fan or personal respirator)