RC4GS V3 General Information

1) 5 channels, 30 models memory storage, a key switch to change mixes control, dual-rate and cruise control, with timer setting for training and racing, DSC port is optional for simulator, TBS crossfire.
2) RC4GS V3 can be works with: R7FG/R6FG/R6F/R4FGM/R8F/R8EF.
3) Note: please calibrate ESC (electronic speed control) before first use RC4GS V3 with your car.

Specification:
Size: 174.8*116.4*224.2mm(6.88*4.58*8.83")
Weight: 319g(11.28oz)
Channel: 5 channels
Model Memory: 30
ID seed: 10
Antenna Length: 106mm(4.17")
Control Range: 400 meters
Operating Current: 80-120mA
Operating Voltage: 4.8-16.8V,(6pcs of AA batteries or a 2S-4S LiPo battery),Battery not included.
RF Power: Frequency: 2.4Ghz ISM Band(2400MHz--2483.5MHz)
Modulation Mode: GFSK
LCD Screen: 128*64 Resolution, LCD Backlight
Channel resolution: 4096 with regular jitter of 0.5us
Spread Spectrum: FHSS 67 Channels Pseudo Random Frequency Sequence Hopping
Low Voltage Alarm: Yes. When less than 7.2V or customized on 2-4S battery. (Customizable for each model)
Adaptable Models: Car(Incl.Crawlers/Tanks/Caterpillars etc.)/Boat/Robot
Compatible Receiver: R6FG(Standard), R7FG,R6F, R8EF, R8F, R4FGM,R4F
Battery Tray Dimension: 89*59*25mm (3.5*2.32*0.98")

Receiver R6FG(Standard Pack)
Receiver packed with RC4GS V3 is R6FG, 2.4GHz 6channels,gyro integrated and high voltage servo supported.
Size: 35*20*13mm (1.38*0.79*0.51")
Weight: 6g (0.21 oz)
Channel: 6 channels
Antenna Length: 205mm(8.07")
Operating Current: 30mA
Operating Voltage: 3-12V

Binding
1. Put the transmitter and the receiver close to each other (about 50 centimeters) and power both on.
2. Switch on the transmitter and the led on R6FG will start flashing slowly.
3. There is a black binding button(ID SET) on the side of receiver. Press the button for more than 1 second and release, the led will flash quickly, meaning binding process is ongoing.
4. When the led stops flashing and is always on, binding is complete and there will be a signal tower shown on top of the LCD screen of the transmitter. If not succeed, the led will keep flashing slowly to notify, repeat the above steps.

R6FG has two working modes：normal working mode and gyro working mode.
1. Normal Working Mode
Green LED, gyro will NOT be working.
2. Gyro Function Working Mode
Both GREEN and RED LED on.

Package contents:
1x Radiolink RC4GS V3 transmitter
1x R6FG Gyro Receiver
1X English manual