All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Establishes a direct point-to-point conversion between automotive ECU's using 1000BASE-T1(1000 Mbit/s Fullduplex,) and any standard Fast Ethernet (1000 Mbit/s, 1000BASE-TX) device with an standard ethernet RJ45 connector. Only supports 1000BASE communication, not compatible with 100BASE.
By using the AEC-Q100 qualified TI DP83TG720SWRHATQ1 IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver, ensure a trustworthy and effective tool to customers that are looking for a cost-efficient, quick and manageable solution for testing requirements, with no latency and no packet loss.
Comes with 1x TE MATEnet and 1x MOLEX adapter. Do not provide the over unshielded twisted pair (UTP) cables.
Features with 1000BASE-T1 Master / Slave configuration and an OLED screen. Support Cable open and short fault detection.
Plug and Play, No need to install the drivers.Data pass-through is conducted without disrupting any network protocols.
InnoMaker 10G/5G/2.5GBASE-T1 to 10G/5G/2.5G/1G/100M Base-T (RJ45/SFP+) Media Convertor (10Gbase-T1-T)
KWD 441.500
USB to 10BASE-T1S Ethernet Interface Converter Device 10Mbps Ethernet to 10BASE-T1S Convertor. Support Windows and Linux
KWD 39
100BASE Ethernet Media Converter Device 2-Wire Ethernet 100BASE-T1 to Fast 100BASE-TX Automotive IEEE Compliant with 100Mbit/s Fullduplex Transmit
KWD 63
iszo A Piece pon Module EPON PX20+++ 1.25G Optical Fiber PON Module with 7/9db and SC Port, Compatible with BDCOM TPLINK Ubiquiti HIOSO VSOL Think, for EPON OLT, 20km (px20 9dB,1)
KWD 22.500
