Specification:
★Laser output: ★Laser wavelength：Green laser 510-532nm/Red laser 635-660nm
★Material: Fiber Reinforced Nylon PA66

★Light: 220 lumens
★Working mode: Laser only\ gun light only\Laser and Light Combo\strobe.
★Type of Bulb: LED
★spot size: 25mm@30m
★Runtime:
◆3 hours/only laser use;
◆50 minutes/onlu light only;
◆40 minutes laser light combo.
★Power Source: Battery-powered
★Battery type: Build-in Rechargeable Battery
★Item Package Quantity:1
★Included Components: Light, USB Cord, Wrench

OPERATION
1. There are two switches on both sides of the unit to control the laser and gun lights respectively.
2.Tap the laser switch on either side to turn on or off the laser.
3.Frist press the gun light's switch on either side to turn on the light; Second Press the light switch enter the strobe state; Third press the light switch turn off the light.

Installation requirements
If it meets the following two points, it can fit your pistol:
★First, It requires a standard accessory rail. Make sure your handgun has it. Compatible with Picatinny and Weaver rail.
★Second, Make sure at least 1.57" /1.2”space between the rail groove and the trigger guard

Additional notes:
★Direct viewing of the laser is hazardous to the eyes.
★Never look directly into the laser beam.
★Never point laser beam at person.