Screen Replacement for Apple Watch Series 8 41mm (8th Generation) LCD Display Touch Glass Digitizer Assembly A2772/A2773 G-PS/G-PS+Cellular Repair Parts Kit with Tools (Black)
-Compatible with : LCD Display for Apple Watch Series 8 41mm A2772 A273
Package List:
1x for Apple Watch Series 8 41mm LCD Touch Screen Assembly Replacement
1x Repair tools kits
1x tape
1x Tempered glass

Here are some tips during installation:

1. Please disconnect the battery flex cable from the device before installing the new screen. Failure to do will result in the screen not turning on.
2. Do not apply pressure to the corners of the LCD panel.
3. The screws are all different lengths, make sure they are reinstalled back nto its original location.
4. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
5. Be gentle to the flex cable connectors when removing and installing them. DO NOT over-bend or use excessive force which can tear the flex cable.
Problem Solution :
If problems occur after installation, for example: cannot turn on, no touch, no home button function, flashing, lines on screen etc.
Please make sure flex cable connectors are properly connected to the logicboard and double check all flex cables is in good condition. Then turn off and on the watch.