The projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). When operating the projector in Code 2, both the projector and the remote control must be switched to Code 2.

To change the code for the projector:
Select either Code 1 or Code 2 in the Setting Menu.

To change the code for the remote control:
Press and hold both the MENU and IMAGE buttons together for 5 seconds or more. After changing the code, make sure the remote control operates properly.

Note:
When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector.

If the batteries are removed from the remote control for a long period of time, the remote control code will be reset.

Compatible projector models:

Panasonic PT-LW25HU
Panasonic PT-LX22U
Panasonic PT-LX26HU
Panasonic PT-LX26U
Panasonic PT-LX30HU
Panasonic PT-TW230U
Panasonic PT-TW231RU
Panasonic PT-TW250U
Panasonic PT-TW340U
Panasonic PT-TW341RU
Panasonic PT-TX210U
Panasonic PT-TX310U
Panasonic PT-TX400U
Panasonic PT-VW330U
Panasonic PT-VW430U
Panasonic PT-VW431DU
Panasonic PT-VW440U
Panasonic PT-VX400U
Panasonic PT-VX500U
Panasonic PT-VX501U
Panasonic PT-VX510U

Notice: Make sure there's no obstacle between the remote control and projector when operating the device.

Warranty: Refund available within 30 days, replacement available within 12 months from order date.