AOERUOW Replacement Projector Lamp
We are a Professional manufacture and supplier of light source for projection and stage with more than 10 years experience. we apply advanced optical technology to the projector light source. we are eager to take you into a high-definition bright and dynamic world.
Easy to Install
1. Turn off the power and wait for the projector to cool down at least 30 minutes.
2. Loosen the screws on the back cover of the projector and remove the cover.
3. Loosen the screws of the bulb, grab the handle and take out the bulb.
4. Clean the dust inside the projector and install the new bulb and tighten the screws.
5. Close the back cover and tighten the screws then enter the menu setting to restart the lamp usage time.
Extend the Life of the Lamp
1. Do not disconnect the power directly during use.
2. Each use lasts at least 3 minutes and do not exceed 4 hours each time.
3. Regularly clean the dust inside the projector and around the lamp, and replace the filter.
4. After turning off the projector, wait at least 60 minutes or the projector has cooled down before restarting
Lamp Part Number
RLC-109
Compatible Projector Model
for VIEWSONIC VS16973,VS16977,PA503W,PG603W,PS501W,PS600W Projectors