1.51inch Transparent OLED Compatible with Raspberry Pi 5/4B/3B+/3B/A+/Pi Zero W/Pi Zero 2W, 128 x 64 Resolution, SPI/I2C Interfaces, Embedded Independent Driver Chip, Light Blue Color Display
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
1.51inch Transparent OLED, full viewing angle, 128 x 64 Resolution, embedded independent driver chip, using SPI/I2C Interfaces. Operating voltage is 3.3V / 5V.
Adopts 4-wire SPI and I2C interface, better compatibility, fast data rate. Compatible with Raspberry Pi (Pi 5/4B/3B+/3B/A+/Pi Zero W/Pi Zero 2W,etc.)/Ardui-no/STM32.
Note: The program defaults to SPI mode. If you need to switch the mode, please modify DEV_Config.h. For details, please refer to the program description - bottom hardware interface - interface selection.
Using Attention: 1. Be careful not to connect the power supply in reverse. 2. The same picture cannot be displayed for a long time, or there will be afterimages and cause damage to the OLED.
Comes with relevant resources and tutorials to help you get started quickly: bit.ly/4keLnGx
RP2040-LoRa Development Board, Integrates SX1262 RF Chip, Long-Range Communication, includes LoRa Development Board with 2DB Antenna 850~930 and IPEX to SMA Adapter Cable
KWD 9
ESP32-S3 RGB LCD Driver Board Comes with 2.1inch Round Touch Screen TFT RGB Display LCD 480×480 Pixels, with 32-bit LX7 Dual-Core Processor, 8MB PSRAM and Flash, Support W-i-F i & Blue-tooth
KWD 16
Multi-Functional All-in-One Mini-Computer Kit Compatible with Raspberry Pi 5, with Aluminum Alloy Case, PCIe to M.2 Board Adapter, Dual 4K Outputs Micro Pi5 HDMI and Type-C Adapter(10 Items)
KWD 14.500
USB TO TTL Converter Serial Cable FT232RNL Chip, with Separated 4pin Header + SH1.0 3PIN Connector for Raspberry Pi 5 Serial Port Debugging Compatible with Linux Android WinCE Win7/8/8.1/10/11
KWD 6
