All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
ESP32-S3 With 2.8inch Display Development Board, equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Onboard 2.8inch touch LCD display, 480×640 resolution.
Supports 2.4GHz W-i-F--i (802.11 b/g/n) and Blue-too--th 5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM.
Supports touch control via I2C interface, with interrupt support (for touch versin only). Adapting UART, I2C and some IO interfaces, integrates full-speed USB port.
Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
Comes with Online Development Resources /User Manual, please follow there: bit.ly/4gtPyLp
Luck-Fox Pico Mini RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, 64 MB DDR2, 0.5TOPS, Supports int4, int8 and int16 NPU (without Flash and Header)
KWD 5.500
ESP32-S3 1.46inch Round Touch Display Development Board, IPS Display Panel, 412×412 Pixel, Accelerometer and Gyroscope Sensor, Onboard Speaker and Microphone, ESP32 with Display, with Cover Glass
KWD 14
Official Raspberry Pi CSI FPC Flexible Cable for Raspberry Pi 5, 22Pin to 15Pin, Suitable to Connect CSI Camera to Raspberry Pi 5 and All Raspberry Pi Zero Models (200mm Length)
KWD 3.500
Core1262 LF/HF LoRa Module, SX1262 Chip, Long-Range Communication, Anti-Interference, Suitable for Sub-GHz Band, Quick Connect to Cloud Servers to Build LoRa/LoRaWAN Network,TCXO Crystal Oscillator
KWD 6.500
