All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
ESP32-S3 2.8inch Round Display Development Board, onboard 2.8inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz W-i-F-i (802.81 b/g/n) and BLE 5 (LE), with onboard antenna.
Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port.
Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios.
Comes with Online Development Resources /User Manual: bit.ly/4jZODp4
2PCS Compatible with Raspberry Pi Pico 2 Microcontroller Board with Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core ARM Cortex-M33 and Dual-Core Hazard3 RISC-V Processor 4MB Flash
KWD 11
RP2350-ETH Mini Development Board, RP2350 Ethernet Port Module, RPi Microcontroller Development Board Based on RP2350 Dual-Core Arm Cortex-M33 & Dual-Architecture Hazard 3 RISC-V Microcontroller
KWD 8
RP2350-One Pico-Like MCU Board 4MB Flash, Based On RP2350A Dual-Core & Dual-Architecture Microcontroller, Onboard PCB Type-A Plug, Plug and Play, No Additional Cables Required
KWD 5.500
ESP32-C3 Development Board with 0.71inch Round Display 160x160 Resolution, Based on ESP32-C3 Single-Core Processor, SPI Interface Display, ESP32 with Display, with Protective Case
KWD 9
