Only for iPhone 8 (4.7 inch), Not for iPhone 7 /7 Plus/ 8 Plus and other iPhone Series.

The screen replacement is with back plate and without Ear Speaker, Front Camera, Proximity Sensor, so please swap them out from your old screen and install them.

Note: Test it before installation please
1. Do not apply pressure to the corners of the screen panel.
2. Make sure each screw is installed back to its original hole.
3. Be gentle and cautions to the flex cable connectors when installing.
4. Please check the screen and make sure all flex cables are in good condition and there is no debris on the connector.
5. DO NOT over-bend or use excessive force to tear it.
6. Please please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, it will be easy for your phone to short circuit.

Problem Solution
If your phone has some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps:
1. Reinstall all flex cables from the motherboard and double check all flex cable is in good condition.

Package Include:
1 x Screen Assembly
1 x High Qulity Repair Tools Set
1 x Hardness Tempered Glass
1 x Detailed Repair Flowchart
1 x Waterproof Adhesive

If you have any questions or our screen is defective, please don't hesitate to contact seller before you return it, your issues must be solved in 24 hours. So long as the products cannot work without human factors, we will change new for you freely and make up for your loss.

We are in this area more than 13 years. Trust us! .