3Pin 5VARGB Mini Controller Cable
1.This controller is a 5V3 pin ARGB product using SATA power supply, it doesn't need the motherboard to support 5VARGB, it can be powered by plugging it directly into the SATA port.
2.The product has a built-in lighting mode, press the button to realize the lighting control of the 5V3 pin ARGB product. 3.5v3 pin interface is designed with an extension cable, which is easy to connect, not easy to fall off, and solves the problem of insufficient cable length at the same time
4.3-pin interface has a protective cover to protect the needle from bending and deformation
5.adhesive backing fixed, easy to install, the bottom of the adhesive backing can be firmly affixed to the chassis, so that the installation becomes more simple
6. Main function usage: M key: click to switch to the next light mode, you can cycle through the controller's own light mode
.S button:Click to switch the speed of light conversion, there are 8 gears to cycle through the switch long press the S button for 4 seconds to turn off the light, then long press for 4 seconds to turn on the light
C button: together to switch to the same mode of other light colors or make the light cycle backward long press the C button for 5 seconds to switch the brightness of the light, a total of 6 levels of brightness can be switched cyclically
7. Lighting modes: color float, big tent, color ring, monochrome breathing and so on.

Specification
Name:ARGB Mini Controller
Size:46x22x95
Interface Type:SATA.3PIN
Length:Total length about 50(+/-1)cm, cable length about 45(+/-1)cm.

Packing.

This package includes:1 x mini ARGBmini controller.

Note:This controller does not support connecting the motherboard software to control the light synchronization