Related Items

---

• 64x64 RGB LED Matrix Panel Full Color for Raspberry Pi/Ardui 192x192 mm 3mm Pitch 4096 LEDs Adjustable Brightness KWD 16
• BME688 Environmental Module, Barometric Pressure, , Humidity, VOC Gas Change, I2C, SPI, for Raspberry Pico, ESP32, Motherboard KWD 11
• Tinker Board 2S 6-Core 2.0 GHz Rockchip RK3399 Single Board Computer 4GB RAM 16GB eMMC Storage GB LAN Wi-Fi & Bluetooth 5.0 GPIO Connectivity Support 4K Dual-Display KWD 65.500
• BME680 Environmental Sensor for Raspberry Pi/Raspberry Pi Pico/Arduino/ESP32, Supports Temperature/Humidity/Barometric Pressure/VOC Gas Detection, I2C and SPI 3.3V/5V Level KWD 7
• waveshare 2.9inch E-Ink Display Module Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 296x128 Resolution SPI Interface Supports Partial Refresh KWD 12
• ESP32 S3 Development Board N8R8 ESP WROOM 32 S3 IoT Type-C Core Hat, Dual Type-C ESP32-S3 DevKitC 1 Industrial Internet of Things (IIoT) Smart Home Automation Cores Microcontroller Processor KWD 5.500
• Waveshare 2.13inch E-Paper E-Ink Display Module (B) for Raspberry Pi Pico 212×104 Pixels Red/Black and White with SPI Interface KWD 9.500
• youyeetoo Sipeed Tang Primer 20K FPGA Development Board MCU, with LUT4, PMOD Port *4, for RISC-V and Embedded Development (Lite ext-Board Version) KWD 16
• 192, Mega Protoshield for Arduino KWD 7.500
• Waveshare 400 GPIO Header Adapter Compatible with Raspberry Pi with Header Expansion 2X 40PIN Header KWD 5
• 2pcs PCA9685 16 Channel 12 bit PWM Servo Motor Driver I2C IIC Module for MG90S SG90 MG995 Compatible with Arduino Raspberry Pi KWD 6
• DEVMO MAX7219 Dot led Matrix MCU Control LED Display Module Compatible with Ar-duino Raspberry Pi Microcontroller with 5Pin Line KWD 6
• 3.3V SN65HVD230 CAN Board Kit Connecting MCUs to CAN Network ESD Protection Onboard CAN Transceiver Compatible with PCA82C250 Communication Development Module KWD 4
• Waveshare Luckfox Pico Max RV1106 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors-256MB Memory, with Pre-soldered Header KWD 10
• 4.2inch E-Ink Display Module for Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH 400x300 Resolution Black White Two Color SPI Interface Support Partial Refresh KWD 14
• RP2350 MCU Board with 1.28inch Round LCD 240×240 Pixels 65K Colorful IPS Display Dual-core & Dual-Architecture Design KWD 10.500
• 2-CH UART to Ethernet Converter Module Fits Raspberry Pi/Arduino/STM32 Serial Port Bi-Direction Transparent Transmission Between UART and Ethernet, ETH to UART KWD 7
• PCIe to M.2 Adapter (E) with Cooling Fan for Raspberry Pi 5 Compatible with M.2 NVMe SSD 2230 2242, Gen2 and Gen3 Modes Onboard Dual LED Indicators Fits Raspberry Pi 5 NVMe KWD 8.500
• Stack HAT Raspberry pi I/O Expansion Shield Onboard 5 Sets 2x20 Connector to Directly Connect Multiple Expansion Functional Boards KWD 8.500
• IMX335 5MP USB Camera (B) for Raspberry Pi 5/Jetson Orin Kit 2K Video Recording 175° Wide Angle Better Sensitivity in Low-Light Condition Wide Dynamic Range USB2.0 Port KWD 20
• POE Expansion Board for NVIDIA Jetson Orin Nano/NX Mini Body Saves Even More Space Network Connection and Power Supply Provided for Jetson Orin KWD 9.500
• Raspberry Pi Monitor, 8" HDMI Screen 1280×800 IPS HDMI Portable Touchscreen Monitor, Touchscreen Display Fit for Raspberry Pi 5/4/3/2, Support Jetson Nano/PC, Drive-Free KWD 26
• ZDE ZP593 PCIe to 2.5G Ethernet PCIe to M.2 Key-M NVMe SSD HAT Expansion Board for Raspberry Pi 5 Support M.2 NVMe 2230/2242/2260/2280 SSD KWD 12.500
• PCIe to M.2 Adapter with PoE Function HAT+ (B) for Raspberry Pi 5 – Supports NVMe Drives (2230/2242/2260/2280) | IEEE 802.3af/at Power Over Ethernet | Gen2/Gen3 Mode | Bootable SSD Support KWD 13.500
• BME688 Environmental Sensor for Raspberry Pi/Raspberry Pi Pico/Arduino/ESP32, Supports Temperature/Humidity/Barometric Pressure/VOC Gas Detection/AI Function, I2C and SPI with AI Function KWD 11.500
• WM8960 Audio HAT Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Hi-Fi Sound Card HAT Stereo CODEC Playing and Recording I2S Interfac Stereo 3D Surrounding KWD 11
• Uninterruptible Power Supply (UPS) Module for Raspberry Pi/Jetson Nano Supports Charging and Power Output at The Same Time 3S & 5V 5A Output KWD 13
• KEYESTUDIO ESP32-CAM Vision Smart Car for Arduino Robot Kit KWD 12.500
• PoE M.2 E Key HAT+ for Raspberry Pi 5, PCIe to M.2 E Key Adapter with PoE, Supports NGFF (M.2 E Key) Wireless NIC, USB Bluetooth, SMA Antenna, 16-Pin PCIe & 40-Pin GPIO, 5V/12V Output KWD 13.500
• for Raspberry Pi RS485 CAN HAT (B) Isolated 2-Ch RS485 1-Ch CAN SPI Communication On-Board SC16IS752 and SP3485 Chips with MCP2515 Controller CAN Transceiver Multiple Protections KWD 10.500
• 2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi 5/4B/3B/2B/Zero/Zero W/Zero WH/Jetson Nano 2-CH CAN HAT+ Stackable Design for Expanding Multiple CAN Channel KWD 12
• Adafruit 1986 Downgrade GPIO Ribbon Cable for Raspberry Pi Model B+ 40p to 26p KWD 3.500