DC 5521 Power Pigtail Cable 90 Degree Right Angle 18AWG DC Power Male Plug Jack to Bare Wire Open End Pigtail Power Cable Cord for CCTV Surveillance Camera LED Light Bar-3PCS
90 degree right angle plug jack repair cable can easily fit through narrow gaps and will never bend and damage the power cord, pre-tinned bare wire, easy to solder and install, connect
L-Shape DC5521 replacement power cord: 18AWG male power pigtail, suitable for 5V 12V DC power supply equipment with 3 amps, widely used for frayed or broken power cords
Note: The ends of the DC power pigtail cable are black and red to indicate the polarity (red is positive and black is negative), and the DC 5521 male plug corresponds to the inner positive and the outer negative
High-quality material: The DC power cord is 1m long (about 3.3FT), which is enough for most projects. It can also be cut as needed. Double-layer PVC insulation layer is safer and corrosion-resistant
Wide Application: Widely used in CCTV systems, surveillance, parts lighting, LED light strips, car rear view surveillance system video and other DC 2.1 x 5.5 mm DC power equipment.
Description
HATMINI 90 degree DC power tail cable
Specification:
Standard DC5521 male plug
Voltage: 12V/24V
Power: ≤120W
Connector 1: DC5521 male plug.
Connector 2: Black and red bare wires. Cable length: about 1M/3FT
Wire gauge: 18AWG
feature:
1.90 degree right angle, solving the problem of limited connections between devices, 18AWG pure copper wire, better conductivity, allowing greater current to be used.
2. The tail is tin-plated and easy to weld.
Supports 0-24V devices, load 120W.
3. Wrapped in an environmentally friendly PVC sheath, it is safe and durable and can be bent at will.
4.2-pin bare wire is red (positive)/black (negative) for easy identification.
packing list:
3 pieces DC 5.5mm x 2.1mm male plug to 2 pin bare wire