Leofoto SA-X+MA-40X Outdoors Tripod with Rapid Lock Ballhead | SA-X & 3/8" - SA-404CLX+MA-40X - Arca Clamp -New "X" Version Apex Design: Rosette Connector AND 3/8" Mounting Stud -New "X" Version Angle Stop: Allows for one handed angle adjustment -Threaded 1/4” accessory socket on the side of the apex to provide the perfect placement of a strap or magic arm for holding anything from an umbrella, phone or even a kestrel -Tripods must occasionally withstand tremendous bending and torsion loads. It is crucial that the leg angle stops and all other structural joints are well supported. Leofoto offset leg joints fully support the leg angle stops allowing loads to be transferred straight through the strongest members of the tripod. This also means the tripod is more compact when collapsed -Large diameter rubber feet keep leg sidewalls from touching the ground even at the lowest settings and makes positive contact with the ground at virtually any angle -Hard anodized, CNC-machined 6061 T6 aluminum hardware -Toray Carbon Fiber Leg Tubes -Included: Leofoto Tripod Case The Leofoto MA-40X Lever-Release Rapid Lock Ball Head was designed specifically to be used on an SA-X tripod, but it features both the SA-X rosette connection as well as a standard 3/8" mounting socket. The head has a lever release to lock/unlock the ball and a redesigned lever-release clamp system with an adjustable clamping width. SA-404CLX+MA-40X Rosette + 3/8” X Angle Stops Long ver. Tubes: 40/36/32/28mm With head Max. height: 1815mm / 71.46in Min. height: 179mm / 7.05in Folded length: 719mm / 28.3in Leg Section: 4 Weight: 2.70kg / 5.95lb Max load: 40kg / 88.18lb