50PCS Gray and Gold Wax Seal, Glue Gun Wax Sealing Sticks for Wax Seal Stamp, Wax Seal Gun Sticks Suit for Glue Gun Great for Wedding Invitations, Cards Envelopes, Snail Mails, Wine Packages, Christmas Gift Ideas

Features
Suitable for Standard Glue Guns:
The wax stick is 11mm in diameter and 5.5 inches in length, which can be loaded into a full-size (or regular-size) glue gun. The glue gun with a melting chamber can hold the melted wax, which helps you apply the wax.
Easy to Use:
The sealing wax stick is designed for glue guns, which are faster and easier to apply than traditional sealing wax with a wick.
No Flame and No Ash:
Traditional sealing wax requires a flame or a melting spoon, this letter sealing wax stick melts without a flame, so you don't need to worry about ash.
Melting Temperature Tips:
We strongly recommend using a low-temperature full-size glue gun or a dual-temperature full-size glue gun, because the wax melted at a low temperature will not be too thin. Because the wax melted at a high temperature may be very thin and runny.
Note:
We do not recommend taking out the unmelted wax in the melting chamber of the glue gun, and you must use the entire wax stick when using the glue gun.
How to make (multiple) wax seals using a glue gun?
1. Using a glue gun is the most efficient way to seal dozens of envelopes. A pack of 50 glue sticks is usually enough to make 600-750 seals.
2. Choose a low-temperature 0.44-inch standard size glue gun for our wax sticks.
3. Insert the first wax stick into the glue gun and allow it to initially heat up. Place the glue gun upright on a heat-resistant surface. Some wax may drip a little.
4. Once the glue gun is ready, squeeze a quarter-sized amount onto the envelope and place the seal in the center of the wax.
5. Allow the wax to cool for 15 seconds, carefully remove the wax seal, and you're done.
6. If you plan on sealing dozens of stamps, place the stamps on an ice pack between uses to avoid the wax sticking to them.
Remember that the glue gun is designed for glue sticks, which require a much higher melting temperature than the wax, so keeping it cold is key.

SEALING WAX STICKS:
Size: approx. 0.44 inch (11.2 mm) in diameter and 5.3 inches (134 mm) in length
Material: wax and resin
Color: Antique Gold and Gray
Shape: long cylindrical
Package Included:
50 x Sealing Wax Sticks