Specifications:
Product type: Interactive dog toy ball
set includes: 1 pack
Usage:
1, Turn counterclockwise to open the shell of the toy ball, press the power button 3 seconds, the led flash green indicates that the dog interactive ball is started. 2. Turn clockwise to close the toy ball, then you can use the remote control to control the interactive toy ball's movement!
3, Remote control can control the speed of the dog ball, normal or crazy mode; It can also control the direction of the ball, forward rotation or reverse rotation.
4. When the ball runs out of power, please turn counterclockwise to open the shell to charging, the led light is red to indicate that it is charging, and the led light is green to indicate that the charge is completed.
Tips:
1. Please charge fully for first use, Ball built-in LED lights, outdoor use in the evening better; Indoor use can be carpeted to reduce noise.
2. The remote control does not need to be matched and is ready to use when you turn on ball. Turn the switch on the back of the remote control to 'ON', you can use it, long time not use please dial to 'OFF'.
3. This pet toy ball has a built-in motion sensor, when the pet fiddles or bites it, it will automatically start to rotate for 10 seconds, and at the same time turn on the colorful LED light, after 10 seconds, the colorful LED light will continue to flash for 4 seconds. Continue to attract for4 seconds. Continue to attract pets to come and play with it.
4. After the first start, if not triggered, the toy ball will start again after 120 seconds and 180 seconds, during which it will flash colored lights at intervals to increase attractiveness
5. When the toy ball flashes red, please charge the toy ball in time. You can operate this toy ball through the remote control, when the pet is not actively playing with the toy ball, you can use the forward/reverse button to wake up the toy ball to turn and glow to attract pets
Why choose our products?
1. Our products are safe, waterproof and can be used both indoors and outdoors.
2. Our ball toy is suitable for medium and large dogs, and the shell is durable and bite resistant.
3. Powerful, our interactive dog ball is a good helper to consume the dog's physical strength.
Remote control battery replacement steps
1. Use a screwdriver to unscrew the screws of the remote control shell.
2. Open the remote control shell
3. Replace the CR2025 battery. At this time, pay attention to the polarity of the battery, that is, the positive pole is facing up, and the negative pole is facing the circuit board.
4. Install the casing and tighten the screws