iLuane-Let your building blocks have a higher appreciation value. Product Instruction Manual 1.Thread the screw through the hook 2.Push the screw through the hole of the display wallboard 3.Tighten the nuts on the back of the display wallboard 4.Attach the car to the hook according to the hook position in the diagram below How to install display wallboard to the wall: Method A：(Use Expansion screw) Step1: Drill holes in the wall using an electric drill with 6mm Step2: Hammer the expansion pipe into the wall Step3: Screw the screws in with a screwdriver Step4: Leave about 5mm on the outside for hanging the display wallboard Method B：(Use Non-trace) Step1: Find out where to hang the display wallboard on the wall Step2: Drive the trackless nail in with a nail Step3: Hang the display wallboard on the wall Packing Accessories： Display Wallboard*1 Hook * 2 Screw * 5 Nut * 5 Non-trace * 3 Expansion screw *3