How to install lifters:
1.First soak the clean lifters in 5W30 engine oil for about 20 min
2.Orient the flats of each liter body to the flats of the plastic bucket, and snap the lifter into the bucket
3.With four lifters attached to the plastic bucket, inserting the lifter bucket into their respective bores
4.Use a push rod to gently push each lifter down for cam lobe contact

How to install valley cover gasket:
1.Remove knock sensor wire harness and knock sensor
2.Remove valley cover bolts
3.Remove valley cover and gasket, clean the surface
4.Punch out the old knock sensor grommet, tap in the new one, and light dab of oil
5.Place the new valley cover gasket on and align it
6.Reinstall the valley cover and knock sensor

Camshaft Specs:
Type: Hydraulic Roller
Intake Duration @ .050": 196
Exhaust Duration @ .050": 201
Valve Lift Int (in.): .481"
Valve Lift Exh (in.): .481"
Rocker Ratio: 1.7
Lobe Seperation: 116
Camshaft Gear Attachment: 1-bolt
Notes: Works with factory valve springs