Search

Search

OFBAND 3inch 3-Jaw Gear Puller with Reversible Jaws,CR-V Steel Multi-Purpose Puller Tool for Bearing Puller Pulley Puller Steering Wheel Puller Crank Puller Seal Puller Tool (3 inch)

KWD 4.500
Brand
OFBAND
Color3 Inch
– 1 +

Special Features

  • 【Buyer guide】：3/4/6inch 3 jaws puller Max. Tensile Force (t) 1/1.5/2.7, Max. Jaw Spread (inch) 3/4/6, total screw rod length 95mm/130mm/185mm.The centre stand is designed with four corners and can be used as either a 3 jaw puller or a 2 jaw puller.
  • 【Essential automotive tools for mechanics】:If you carry out work to remove pulleys, gears, bearings, cranks etc., our wheel bearing removal tool makes it easy to pull them out and protects these car parts well from damaging them, increasing your efficiency and saving you time.
  • 【Super rigid】: Our 3 jaw puller is forged from integral heat-treated steel with an electroplated finish to ensure it is resistant to warping and rusting. The extra strong grip and reversible jaws support SEAL pulling work on most vehicles with maximum flexibility.
  • 【Reversible jaws】: The jaws of the 3-jaw wheel bearing removal tool can be rotated 360 degrees and the width of the jaws can be extended. The long operating handle helps you to reduce the difficulty of gripping gears and other components in tight spaces and to position them precisely in the centre of the various pulling hooks.
  • 【Note】: Please choose according to the size of the part you need to handle and the range of 3 jaw puller to avoid unsuitable application.If there is a quality problem, we are ready to send you If there is a quality problem, we are ready to send you a new one for free or a full refund.

Description

Specifications.
3inch 3 Jaw Gear Puller - Max. Tensile Force (t): 1 ; Max. Jaw Spread(inch) 3

4inch 3 Jaw Gear Puller - Max. Tensile Force (t): 1.5 ; Max. Jaw Spread(inch) 4

6inch 3 Jaw Gear Puller - Max. Tensile Force (t): 2.7 ; Max. Jaw Spread(inch) 6
Color: Silver + Black
Material: CR-V Steel
You will receive: Screw Stem x1, Pull Tab x6,Bolt x6,Nut x6,Puller Ring x1,Claw Feet 3
Note: 6 plain nuts are required for assembly of each model.

Function: Ideal for removing gears, sprockets, bearings, pulleys and much more.

When in use, the screw center is positioned at the shaft end center hole

to adjust the position of the pulling claw so that the pulling claw is hooked

to the outer ring of the bearing, and the rotating handle makes the pulling

The rotating handle makes the pulling claw drive the bearing to move outward along the axis to remove.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}