Search

Sunglass Temple Tips,Replacement Ear Sock Glasses End Tips/Eye Tips Retainer,Black Eyeglasses Piece Tube Sleeve Anti-Slip for Aviator Sunglass Eye Glasses Frames/Thin Metal Eyewear Frame

KWD 2

Brand
BEHLINE
Category
Vision
Weight
9 g
ColorBlack
1 +

Special Features

  • Material:Acetate.Lighter,harder,not easy to break.It has a certain elasticity, and when it is bent or tightened with a little force, the shape memory plate will return to its original state
  • The surface is smooth and easy to clean.Stains,oil stains,and bacteria do not easily remain on top
  • Prevent the glasses from falling off frequently,more convenient for daily life and work
  • Replacement for Most Sunglasses Eyeglasses Model:RB3025,RB3026,RB3136,RB3362 and more other models not listed.The hole of this temple tips is round,It can't be fitted for flat hole(such as RB3387)
  • Don't waste time and money on new glasses.Use our nose pads to revive your frames and bring new comfort and life to your glasses

Description

You Will Get 1 Pair Temple Tips Replacement for Sunglasses/Eyeglasses (Clear) with Cleaning Cloth

These tips will fit for different aviators such as:

-RB 3025 Large Metal RB 3183, 3179, 3186, 3198
-RB 3026 Large Metal -RB 3138 Shooter
-RB 3029 Outdoorsman -RB 3362 Cockpit
-RB 3030 Outdoorsman -RB 3407, 3447
-RB 3136 Caravan -RB 3044 Small Aviator
-RB 3211.

Warming Tips: The hole of this temple tips is round, it can't be fitted for flat hole.If you are not sure ,we are happy to check for you

Specification:

Condition: New

Color: Clear

Length: 70mm / Hole diameter 1.4mm

Features:

Resistant to moisture, sweat, and skin oil, made of high quality silicone.

Make your old glasses brand new again and gives a better fit, great for sports enthusiasts.

Please note these are the hard plastic tips and are not the rubber tips.

We do have other colors including Brown, Tan/Beige, Black temples tips, please search our store for other listings.

Installation:

Easy DIY installation in 5 easy steps and it can be done in less than 5 minutes!
You can also bring these to an optician and have them installed for you.

Step 1: Use a blow dryer to heat the old temple tips for 20 seconds each side evenly. (If you don't have a blow dryer you can also put the tips under hot water.)

Step 2: When the temple tips become soft and pliable, use your hands to bend the temple tips straight. Then use a pair of needle nose pliers to pull the old temple tips out from the metal arms.

Step 3: Prep the bare metal tips by cleaning with soap and water or a lens cleanser.

Step 4: Take the new tips, and slowly twist and push it into the metal arms.

Step 5: Heat the new tips slightly, and bend it to create the perfect curve to fit around your ears.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}