Two kinds of thicknesses
The thin one : 1.8mm/0.07in
The thick one : 2.5mm/0.10in
Four kinds of adhesive nose pad : Water drop ,Butterfly , D-1 ,D-2
Package bonus ： 2 pieces of alcohol cottoon cloth,1 glasses cleaning cloth. Scope of Application
Suitable for all kinds of sheet metal optical frames, sheet metal sunglasses, plastic glasses, TR90 frame, for the situation that the original nose pad position of the frame is relatively wide, the glasses slip obviously after wearing, the eyelashes touch the lens, the cheek touches the frame, the bridge of the nose is too low, etc. All can be applied to the nose pad for heightening and anti-skid.

Applicable Method
The method of using this nose pad is very simple. Before pasting, please be sure to fully clean and dry the nose pad of the glasses or wipe it clean, and then perform the paste operation. Try to avoid residual water, oil and stains on the nose pad.
Before pasting the nasal stickers, please do not open the adhesive veneer immediately. You should first measure the position you need to paste, and then tear off the sticker and stick it directly after deciding on the pasting position. Try to stick it successfully once, because the nasal patch veneer cannot be used for secondary operations, which will greatly reduce the firmness of the sticking.

Service Life
For summer use, people who don't sweat a lot can use it normally for about 3 months, and those who sweat a lot need to replace it in one or two months. If used in winter, it can normally be used for about half a year. Therefore, it is recommended to prepare a few more at a time to facilitate replacement.

Special Note
Nose stickers cannot be pasted and used repeatedly. Please do not tear off the stickers after pasting. The second pasting will directly affect the stickiness of the nose pads. Please do